- Important information
- New features
- Known problems
- Program corrections
- User guide corrections
- Miscellaneous
- Release history
Important information
Firmware update XDS200 probe needed
When you are installing the TI emupack enclosed with EWARM 7.60.2 make sure that your XDS200 probe has the latest firmware (v1.0.0.8).
The firmware update tool is found in your TI emupack installationC:\ti\ccs_base\common\uscif\xds2xxInstallation of USB drivers for TI XDS debugger probes
During the installation of the Embedded Workbench for ARM (EWARM) you have the possibility to install the TI USB drivers.
But in case you need to install any driver manually following steps are done:
-
If you are using TI XDS100/110/200 emulator, you must have the version of
the TI emupack provided with this release of EWARM installed in the suggested directory
C:\ti.
The TI emupack installer is located in thearm\drivers\ti-xdsdirectory of the EWARM installation.
Note: To install the TI emupack you must have full administrative rights on your computer. To achive this you have to do Run as administrator when starting the installer.
The following USB drivers are included in the TI emupack installation, and will be installed in your system as part of the installation procedure:
-
For TI XDS110, USB drivers are found in the
C:\ti\ccs_base\emulation\windows\xds110_driversdirectory. -
For TI XDS100, USB drivers are found in the
C:\ti\ccs_base\emulation\windows\xds100_driversdirectory. -
For TI XDS200, USB drivers are found in the
C:\ti\ccs_base\emulation\windows\xds2xx_driversdirectory.
-
For TI XDS110, USB drivers are found in the
-
For some TI XDS110 boards, you need to explicitly install the USB driver in the
arm\drivers\StellarisICDIdirectory of the EWARM installation. This USB driver is also possible to install during the installation of the EWARM.
-
If you are using TI XDS100/110/200 emulator, you must have the version of
the TI emupack provided with this release of EWARM installed in the suggested directory
The C-SPY driver for the TI XDS emulators currently supports the following TI device families: AM1xx, AM3xx, AM43xx CC13xx, CC2538, CC26xx, CC32xx, F28M3x, LM3S, LM4F, MSP432, OMAPL138, RM48L, TMS470M, TMS570.
New features
Known Problems
Program Corrections
User guide corrections
Miscellaneous
- None.