You need to install this patch if you get a no-license error and the serial number on your I-jet is not in the form of 7xxxx.

Updated flash loader and device description files for Texas Instruments CC2538.

This service pack includes the following:

• Support for the IAR I-scope power measurement probe
  I-scope is a small probe that adds current and voltage measurement capabilities to I-jet. See www.iar.com for more info on I-scope.

• Corrected problems in previous 6.50.x releases, see the release notes for further details.

• Support for new devices:

  • Atmel
    SAM4SA16B, SAM4SA16C, SAM4SD16B, SAM4SD16C, SAM4SD32B, SAM4SD32C

  • Freescale
    MKE02Z16xxx2, MKE02Z32xxx2, MKE02Z64xxx2, MKL16Z32xxx4, MKL16Z64xxx4, MKL16Z128xxx4, MKL26Z32xxx4, MKL26Z64xxx4, MKL26Z128xxx4, MKL26Z256xxx4, MKL34Z64xxx4, MKL36Z64xxx4, MKL36Z128xxx4, MKL36Z256xxx4

  • Renesas
    R-IN32M3

  • ST
    STM32F405OE, STM32F405OG, STM32F415OG

  • Texas Instruments
    LM3S5D51, LM3S5D56, LM3S5D91, LM3S5G31, LM3S5G36, LM3S5G51, LM3S5G56

  • Xilinx
    Zynq 7010, Zynq 70100, Zynq 7020, Zynq 7030, Zynq 7045

This service pack includes the following:

• Corrected problems in previous 6.50.x releases, see the release notes for further details.

• Support for new devices:

  • Atmel
    ATSAM4LC2A, ATSAM4LC2B, ATSAM4LC2C, ATSAM4LC4A, ATSAM4LC4B, ATSAM4LC4C, ATSAM4LS2A, ATSAM4LS2B, ATSAM4LS2C, ATSAM4LS4A, ATSAM4LS4B, ATSAM4LS4C

  • Freescale
    MK21FN1M0xxx12, MK21FX512xxx12, MK22FN1M0xxx12, MK22FX512xxx12

  • Texas Instruments
    Tiva C Series ARM Cortex-M4
    TM4C1230C3PM, TM4C1230D5PM, TM4C1230E6PM, TM4C1230H6PM, TM4C1231C3PM, TM4C1231D5PM, TM4C1231D5PZ, TM4C1231E6PM, TM4C1231E6PZ, TM4C1231H6PGE, TM4C1231H6PM, TM4C1231H6PZ, TM4C1232C3PM, TM4C1232D5PM, TM4C1232E6PM, TM4C1232H6PM, TM4C1233C3PM, TM4C1233D5PM, TM4C1233D5PZ, TM4C1233E6PM, TM4C1233E6PZ, TM4C1233H6PGE, TM4C1233H6PM, TM4C1233H6PZ, TM4C1236D5PM, TM4C1236E6PM, TM4C1236H6PM, TM4C1237D5PM, TM4C1237D5PZ, TM4C1237E6PM, TM4C1237E6PZ, TM4C1237H6PGE, TM4C1237H6PM, TM4C1237H6PZ, TM4C123AE6PM, TM4C123AH6PM, TM4C123BE6PM, TM4C123BE6PZ, TM4C123BH6PGE,TM4C123BH6PM, TM4C123BH6PZ, TM4C123BH6ZRB, TM4C123FE6PM, TM4C123FH6PM, TM4C123GE6PM, TM4C123GE6PZ, TM4C123GH6PGE, TM4C123GH6PM, TM4C123GH6PZ, TM4C123GH6ZRB, TM4C1290NCPDT, TM4C1290NCZAD, TM4C1292NCPDT, TM4C1292NCZAD, TM4C1294NCPDT, TM4C1294NCZAD, TM4C129CNCPDT, TM4C129CNCZAD, TM4C129DNCPDT, TM4C129DNCZAD, TM4C129ENCPDT, TM4C129ENCZAD, TM4C129XNCZAD, TM4E1111E6PDT, TM4E1111E6ZRB, TM4E1113E6PDT, TM4E1113E6ZRB, TM4E1115E6PDT, TM4E1115E6ZRB, TM4E1117E6PDT, TM4E1117E6ZRB, TM4E111AE6PDT, TM4E111AE6ZRB, TM4E111BE6PDT, TM4E111BE6ZRB, TM4E111CE6PDT, TM4E111CE6ZRB, TM4E1231H6ZRB, TM4E1237H6ZRB, TM4E123GH6ZRB, TM4E129BNCZAD, TM4E129SNCZAD, TM4E129XNCZAD, TM4E1G31H6ZRB, TM4EH110E6PDT, TM4EH110E6ZRB, TM4EH115E6PDT, TM4EH115E6ZRB, TM4EH117E6PDT, TM4EH117E6ZRB
    Hercules
    TMS570LS1114PGE, TMS570LS1114ZWT, TMS570LS1115PGE, TMS570LS1115ZWT

  • Toshiba
    TB6865FG, TMPM36BFYFG

This service pack includes the following:

• Support for ARM CMSIS-DAP
  The debugger now supports development boards that use the ARM CMSIS-DAP interface over USB.

• Corrected problems in previous 6.50.x releases, see the release notes for further details.

• Support for new devices:

  • Atmel
    ATSAM4E8C, ATSAM4E8E, ATSAM4E16C, ATSAM4E16E, SAM9CN11, SAM9CN12, SAM9G15, SAM9G25, SAM9G35, SAM9N12, SAM9X25, SAM9X35, SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35

  • EnergyMicro
    WonderGecko EFM32WGxxx

  • Freescale
    MK21FN1M0xxx10, MK21FX512xxx10, MK22FN1M0xxx10, MK22FX512xxx10, MVF30NN151KU26, MVF30NS151KU26, MVF50GN151MK40, MVF50GS151MK40, MVF50GS151MK50, MVF50NN151MK40, MVF50NS151MK40, MVF51GS151MK50, MVF61GS151MK50, SVF311R3KU2, SVF312R3KU2, SVF511R3MK4, SVF512R3MK4

  • Fujitsu
    MB9AF131M, MB9AF131N, MB9AF132M, MB9AF132N, MB9AFA31L, MB9AFA31M, MB9AFA31N, MB9AFA32L, MB9AFA32M, MB9AFA32N

  • Infineon
    XMC1100, XMC1200, XMC1302

  • ST
    STM32F427IG, STM32F427II, STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F437IG, STM32F437II, STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI

  • Texas Instruments
    F28M36x33B, F28M36x33C, F28M36x53B, F28M36x53C, F28M36x63B, F28M36x63C

This service pack includes the following:

• Support for MTB (Micro Trace Buffer)
  The MTB trace mechanism gives access to instruction trace on devices based on the Cortex-M0+ core.

• Improved uC/Probe integration
  A new debugger plug-in connects uC/Probe to C-SPY over TCP/IP, making it possible to use Micrium's graphical tool uC/Probe at the same time as you debug with IAR Embedded Workbench.

• Corrected problems in the 6.50.1 release, see the release notes for further details.

• Support for new devices:

  • Freescale
    MK11DN512xxx5, MK11DX128xxx5, MK11DX256xxx5, MK12DN512xxx5, MK12DX128xxx5, MK12DX256xxx5, MK22DN512xxx5, MK22DX128xxx5, MK22DX256xxx5, MKL02Z8xxx4, MKL02Z16xxx4, MKL02Z32xxx4, MKL04Z8xxx4, MKL04Z16xxx4, MKL04Z32xxx4, MKL14Z32xxx4, MKL14Z64xxx4, MKL15Z32xxx4, MKL15Z64xxx4, MKL15Z128xxx4, MKL24Z32xxx4, MKL24Z64xxx4, MKL46Z128xxx4, MKL46Z256xxx4

  • Fujitsu
    MB9AF154M, MB9AF154N, MB9AF154R, MB9AF155M, MB9AF155N, MB9AF155R, MB9AF156M, MB9AF156N, MB9AF156R, MB9BF121K, MB9BF121L, MB9BF121M, MB9BF122K, MB9BF122L, MB9BF122M, MB9BF124K, MB9BF124L, MB9BF124M, MB9BF321K, MB9BF321L, MB9BF321M, MB9BF322K, MB9BF322L, MB9BF322M, MB9BF324K, MB9BF324L, MB9BF324M, MB9BF521K, MB9BF521L, MB9BF521M, MB9BF522K, MB9BF522L, MB9BF522M, MB9BF524K, MB9BF524L, MB9BF524M

  • NXP
    LPC810M021, LPC811M001, LPC812M101

  • Texas Instruments
    CC2538NF11, CC2538NF23, CC2538NF53, CC2538SF23, CC2538SF53, CM2538SF23, CM2538SF53

IAR Embedded Workbench for ARM version 6.50.1

The new version introduces a new License Management System (LMS). The new LMS includes new features like commuter licenses, automatic license activation and support for virtual servers. It is easier to administrate and a single installer concept enables easy transfer between all variants of IAR Embedded Workbench for a certain product by a license upgrade.

Important information
A new license key must be issued in order for you to be able to use the software. The process of issuing the new key is done automatically when the new version is installed, providing that your current license has a valid Support and Update Agreement associated with it in our license database.
The installation and licensing quick reference guide included with the product contains all the information you will need to convert your existing license key to work with the new license management system.

Important information for network licenses
This version of IAR Embedded Workbench uses version 2 of the IAR License Management System (LMS2), which requires an updated version of the IAR License Server (version 2.1x). The new license server cannot run on the same computer as the previous server (version 1.4x). In order to use network licenses for both an LMS1 version and an LMS2 version of your IAR Embedded Workbench product you must use different PCs as license servers, unless virtual servers are used.
If your LMS1 license server is using a dongle, you have a choice for your LMS2 server to either order an additional dongle (without additional cost) or to lock the license to the server PC. In this case, you must inform IAR Systems about which locking criteria you want to use. Send an e-mail to CustomerCare.SE@iar.com and let us know if you want to order an additional dongle or lock you network license to the server PC. This is mandatory and must be done before the network license can be activated on the LMS2 server.